ISO 24146-1:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٤ مايو ٢٠٢٤

Ships and marine technology — Shipboard waste on inland navigation vessels — Part 1: On board management and handling

ملفات الوثيقة ISO 24146-1:2024

الإنجليزية 34 صفحات
الإصدار الحالي
74.27 OMR

مجال الوثيقة ISO 24146-1:2024

This document provides requirements on the management of waste generated during the operation of inland navigation vessels, including handling, collection, separation, marking, treatment, and storage on board of the vessel. It also describes the ship-to-shore interface and the delivery of waste from the vessel to the reception station.

Small crafts or vessels can use this document to improve their waste management.

This document also provides information for segregating and managing waste that any reception station worldwide can expect from inland navigation vessels and concentrates on:

     prevention/elimination/minimization of waste prior to sailing;

     minimization of waste at the source on the inland vessel;

     waste collection at the source;

     waste segregation on the inland vessel into defined categories that are recognized globally and fit into any of the different waste categorization systems around the world;

     waste minimization once segregated;

     waste storage on board the vessel; and

     health and safety concerns surrounding the handling, storage, and offloading of waste.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 13909-8:2025
 
مواصفة قياسية دولية
Coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
ISO/IEC 16466:2025
 
مواصفة قياسية دولية
Information technology — 3D printing and scanning — Assessment methods of 3D scanned data use in 3D printing
ISO 18960:2025
 
مواصفة قياسية دولية
Security controls and implementation for third party payment service providers — Guidance and requirements
ISO 5684:2025
 
مواصفة قياسية دولية
Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products